BT45-INFI
Bluetooth® Music & Phone Interface
for Infiniti
Our BT45 series seamlessly integrates your vehicle's OEM sound system with Bluetooth® enabled devices so you can make hands-free phone calls and wirelessly stream audio media. Our plug & play technology allows you to maintain functionality of factory installed options such as Bluetooth® hands-free, navigation, CD changer, Satellite radio, RSE (rear seat entertainment) system, and AUX/USB input.
|
- Crystal clear sound quality with all speaker playback
- Noise cancellation DSP hardware & CVC (Clear Voice Capture) software
- One button to answer/end/reject calls from the radio or the steering wheel
- Incoming caller number display and announcement
- Enable/disable caller # announcement from the radio
- Toggle between hands-free and phone (for privacy) from the radio
|
|
- Rich & dynamic audio quality with all speaker playback
- Music info (song title, artist & album name) display
- Change tracks from the radio or the steering wheel
- Stream music, podcasts, GPS directions from apps such as iHeart Radio, Spotify, Google Maps, Waze, and YouTube.
|
|
- 3.5mm AUX port
- Connect any non-Bluetooth® device equipped with a headphone jack to play its audio through your vehicle's sound system
|
|
- Keep your device charged and ready to go
- USB port is for charging only
|
|
- 03-08 FX35, 03-08 FX45, and all 99-01 models please use the BT45-NIIS package.
- Not compatible with radios that have a SD slot or an iPod/Menu button
|
Satellite Radio Receiver Locations for Infiniti
1 / 7
UNDER THE REAR DECK (images 1-3):
Remove the trunk's rear deck cover
2 / 7
UNDER THE REAR DECK (images 1-3):
SAT/XM receiver or pre-wired cable location
3 / 7
UNDER THE REAR DECK (images 1-3):
The top metal box is the SAT/XM receiver. If receiver box is not present then look for the SAT/XM pre-wired cable at the same location.
4 / 7
UNDER THE TRUNK FLOOR (images 4-7):
If receiver box is not present then look for the SAT/XM pre-wired cable, pictured here.
5 / 7
UNDER THE TRUNK FLOOR (images 4-7):
A different view of the pre-wired cable location.
6 / 7
UNDER THE TRUNK FLOOR (images 4-7):
2012 Infinity G37 Sedan
7 / 7
UNDER THE TRUNK FLOOR (images 4-7):
2012 Infinity G37 Sedan
❮
❯
1 / 4
Open the glove box and locate the removable panel
2 / 4
Remove the panel
3 / 4
Locate and GENTALLY pull out the factory SAT/XM pre-wire cable
4 / 4
Plug the factory SAT/XM pre-wire cable into BT45-INFI cable's male-pin terminal
❮
❯
*images used are from https://www.6mt.net/mod-g35-satellite-radio-tuner-install.php
1 / 3
Remove the trunk's floor mat(s) to expose the spare tire.
2 / 3
Remove the spare tire and nuts holding the shroud. Work the shroud over and off to the right. SAT/XM receiver or pre-wired cable is underneath the BOSE amplifier and its mounting bracket.
3 / 3
Close up view of the BOSE amplifier box in its mounting bracket. Pictured here is the SAT/XM pre-wired cable underneath the amplifier box.
❮
❯
1 / 3
SAT/XM receiver or pre-wired cable is located in the space above the gas pedal
2 / 3
Close-up view of the space above the gas pedal
3 / 3
SAT/XM receiver or pre-wired cable location. Pictured here is the pre-wired cable, some vehicles such as the one shown here might not have the SAT/XM receiver.
❮
❯
Tech Specs
| Bluetooth® |
- Version 2.1 + EDR with aptX
|
| Device Compatibility |
- Any Bluetooth® wireless technology enabled device
- A2DP (Advanced Audio Distribution Profile) for media streaming
- AVRCP (Audio/Video Remote Control Profile) 1.4 or higher for streaming control and music info display
|
| Package Content |
- BT45-INFI Interface Module
- BT-INFI Cable: 4ft / 1.2m
- MIC45 Microphone: 16.5ft / 5m
- Product Manual
|